Hello merlinkv,

I am trying to assemble a Dandanator MTD but having some trouble finding the SD_Kyocera_145638109511859+ and the SPDT_ON_OFF_Big. Where do you get yours from?
Thanks

AndyP escribió: ↑23 May 2022 23:11 Hello merlinkv,

I am trying to assemble a Dandanator MTD but having some trouble finding the SD_Kyocera_145638109511859+ and the SPDT_ON_OFF_Big. Where do you get yours from?
Thanks

Fellow merlinkv won't be able to help you.
He lives in Ukraine and, as you will understand, he has other more important things to think about.

I imagine you will have no problem finding what you are looking for on Aliexpress. On other sites like Mouser they seem to be out of stock and the lead time is very long.

https://es.aliexpress.com/item/10000004 ... 8613%21sea

https://es.aliexpress.com/item/32851758 ... 6534%21sea

I don't know if they will be valid.

Thanks for the response.
Will try Aliexpress

I hope that merlinkv is safe and things settle down shortly.

AndyP

Hello AndyP, sorry for the delay to answer.

SPDT Switch:

https://www.ebay.es/itm/384978275075?ha ... SwdV1ivFiA

SD Slot

https://www.ebay.es/itm/152757963262

I hope I've been helpful.

Thank you. You have been very helpful. I trust that you are safe.

The parts were ordered and have just arrived and I am in the process of building it.

Will you ever release the stl files for the case?

AndyP,

STL files available on my Github -> ZX Dandanator MTD

Dankeschön

Thanks very much for the .STL files to go along with the Dandanators .

merlinkv escribió: ↑30 Sep 2022 05:43 AndyP,

STL files available on my Github -> ZX Dandanator MTD

Would you have the STL file for the push buttons?
Thanks

Hi AndyP,

They are included in the 7z file ...

merlinkv escribió: ↑04 Oct 2022 18:46 Hi AndyP,

They are included in the 7z file ...

Thanks for the very quick response.

It might just be me but I only see three files in the 7z file,
the two parts of the case (ZXDandanator_MTD_Down.stl and ZXDandanator_MTD_Up.stl)
and the cover for the slide switches (ZXDandanator_MTD_Switches.stl).
I can't see any stl file for the push button covers.

Regards

AndyP

Yes you're right.

The push button covers are not selfmade. I have purchased them time ago.

You can find them on eBay or other sites. They are standard ones.

That explains why I can't find them. Will give evilBay a look.

Thanks very much for all your work on this.